Course syllabus ZTNAM - Testing engineering, technical standardization and metrology (FA - SS 2019/2020)


     Czech          English          


Course code: ZTNAM
Course title in Czech:
Testing engineering, technical standardization and metrology
Course title in English: Testing engineering, technical standardization and metrology
Semester: SS 2019/2020
Mode of completion and number of credits: Exam (6 credits)
Mode of delivery and timetabled classes:
full-time, 2/2 (hours of lectures per week / hours of seminars per week)
Level of course:
master continuing
Course type:
required
Type of delivery: usual
Mode of delivery for our mobility students abroad:
-- item not defined --
Language of instruction:
Czech
Course supervisor:
Ing. et Ing. Petr Dostál, Ph.D.
Course supervising department: Department of Technology and Automobile Transport (FA)
Faculty:
Teachers:
Ing. et Ing. Petr Dostál, Ph.D. (examiner, instructor, lecturer, supervisor, tutor)
Ing. Michal Šustr, Ph.D. (instructor, lecturer)
Prerequisites: none
 
Timetable in this semester:
DayFrom-tillRoom
Teacher
Entry
Frequency
Capacity
Thursday
9.00-10.50
R206LectureEvery week21
Thursday
11.00-12.50R206P. Dostál, M. Šustr
Seminar
Every week
21
 
Aim of the course and learning outcomes:
The aim of the course is to teach students the principles of advanced methods of material and constructions testing and the use of normative and optional management tools. The course is also focused on the application of tools for the statistical processing of measured data and analytical assessment of the accuracy of the measuring system.
 
Course content:
1.
Technical standardization - technical standards used in metrology and testing. (allowance 2/2)
2.
Quality management system according ISO 9000. (allowance 2/2)
3.
The importance of technical standards, a practical view of the concept of quality. (allowance 2/2)
4.
Analysis of Measurement Systems (MSA). (allowance 2/2)
5.
Explanation of Significance of Measurement Analysis and Measurement Systems. (allowance 2/2)
6.
Evaluation of repeatability and reproducibility of measurements, GRR methodology (allowance 2/2)
7.
Practical test of reliability of measuring system, statistical evaluation. (allowance 2/2)
8.Statistical analysis of data in the MINITAB software. (allowance 2/2)
9.Analysis of normal distribution, hypothesis testing. (allowance 2/2)
10.
Histograms, control charts, SPC, MSA. (allowance 2/2)
11.
Calculation of basic statistical parameters of analyzed files, regression dependencies. (allowance 2/2)
12.Methods of materials and constructions testing - defectoscopic methods (NDT) - ultrasound, RTG, Eddy Current method, magnetic methods, capillary tests, etc. (allowance 2/2)
13.
Methods of materials and constructions testing - Acoustic Emission. (allowance 2/2)
14.Destructive testing - fatigue test, tensile test, bending impact test, metallographic analysis, etc. (allowance 2/2)
Learning activities and teaching methods:
Type of teaching methodDaily attendance
lecture
28 h
practice
28 h
workshop
4 h
public presentation (oral)
2 h
preparation for exam
70 h
preparation of presentation
18 h
writing of seminar paper
18 h
Total168 h
 
Assessment methods:
The credit will be awarded on the basis of min. 80% attendance at seminars, passing a credit test with min. 70% of the correct answers, and the processing and presentation of a paper on the subject of metrology.

Written and oral exam. In the written part, the student answers 4 questions, which he explains and discusses in detail. The overall assessment also takes into account the level of the paper presented in the seminar.
 
Assessment criteria ratio:
Requirement type
Daily attendance
Total
0 %
 
Recomended reading and other learning resources:
Basic:
ČSN EN ISO 9001 (010321) Systémy managementu kvality - Požadavky = Quality management systems - Requirements. 48 p.
ČSN P ISO/TS 16949 (010329) Systémy managementu kvality - Zvláštní požadavky na používání ISO 9001:2008 v organizacích zajišťujících sériovou výrobu a výrobu náhradních dílů v automobilovém průmyslu = Quality management systems - Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations. 64 p.
PERNIKÁŘ, J. -- TYKAL, M. -- VAČKÁŘ, J. Jakost a metrologie : Metrologie. Brno: CERM, 2001. 151 p. Učební texty vysokých škol. ISBN 80-214-1997-0.
NENADÁL, J. et al. Moderní systémy řízení jakosti: quality management. 2nd ed. Praha: Management Press, 2007. 282 p. ISBN 978-80-7261-071-6.
VEBER, J. Řízení jakosti a ochrana spotřebitele. Praha: Grada, 2006. 204 p. ISBN 978-80-247-1782-1.
KREIDL, M. et al. Ultrazvuková defektoskopie. Praha: Starmans electronics, 2011. 217 p. ISBN 978-80-254-6606-3.

Course listed in study plans for this semester:
Field of study C-AS-AT Automobile Transport, full-time form, initial period WS 2019/2020
 
Course listed in previous semesters:
Teaching place:
Brno


Last modification made by Ing. Michal Karhánek on 04/23/2020.

Type of output: