Course syllabus ZASK - Basis of Machine Industry K (FA - SS 2019/2020)


     Czech          English          


Course code:
ZASK
Course title in Czech: Basis of Machine Industry K
Course title in English:
Basis of Machine Industry K
Semester:
SS 2019/2020
Mode of completion and number of credits:
Exam (6 credits)
Mode of delivery and timetabled classes: part-time, 8/7 (lectures per period / seminars per period)
Level of course:
bachelor
Course type:
required
Type of delivery:
usual
Mode of delivery for our mobility students abroad:
-- item not defined --
Language of instruction:
Czech
Course supervisor:
doc. Ing. Jiří Votava, Ph.D.
Course supervising department:
Faculty:
Teachers:
doc. Ing. Jiří Votava, Ph.D. (examiner, instructor, lecturer, supervisor)
Prerequisites:
none
 
Timetable in this semester:
Day
From-till
Room
Teacher
Entry
FrequencyCapacity
Friday13.00-16.50
J02
Seminar
Occasionally20
Friday
15.00-18.50
J02
LectureOccasionally20
 
Aim of the course and learning outcomes:
Students learn basic terminology of Engineering. After an exam student should be able to professional communicate with technicians, staff sellers and repairmen. Student will be also manage to judge suitability of designed material, corrosion protection and technology of specific machinery components and technical parameters of machines and equipment.
 
Course content:
1.
Technical materials (allowance 1/1)
 
a.
Ferrous metals
b.Non-ferrous metals

2.Technical drawing requirements (allowance 0/0)
 
a.
Technical drawing requirements
b.
Ways of screening, drawing and quotation
c.
Dimensional tolerances, variations of shape and position of functional areas, the surface roughness

3.
Technical control (allowance 0/0)
 
a.
Measuring of length, shape and surface roughness
b.Measuring errors

4.
Machine parts production (allowance 1/1)
 
a.
Casting, forming, welding
b.
Overview of tilth technology, cutting conditions and production environmental aspects

5.
Basic principles of turning (allowance 1/1)
 
a.Machine – Tool
b.
Cutting conditions

6.
Deformation at turning work (allowance 0/0)
 
a.
Primary and secondary deformation

7.
Cutting materials of surfacing tools (allowance 0/0)
 
a.
High-speed steel, cemented carbide
b.
Special of materials

8.Basic principles of milling (allowance 1/0)
 
a.
Parallel and upcut milling

9.
Milling of module sprockets (allowance 0/0)
 
a.Spur gearing, internal spur gearing

10.
Basic principles of grinding (allowance 1/1)
 
a.Surface grinding of flat surfaces

11.
Surface roughness after machine (allowance 1/1)
 
a.
Device for surface roughness determination

12.
Machine parts and mechanisms (allowance 1/1)
 
a.
Demountable and non-demountable connections
b.Pins, axles, shafts, bearings

13.Corrosion and corrosion protection (allowance 1/1)
 
a.
Corrosion partition, principles of corrosion, factors affecting the process of corrosion
b.Technology of corrosion protection

14.Corrosion and corrosion protection (allowance 0/0)
 
a.
Corrosion tests, test the effectiveness of protective surface protection
b.
Corrosion protection environmental aspects

Learning activities and teaching methods:
Type of teaching methodCombined form
lecture
8 h
practice
7 h
preparation for exam
133 h
elaboration and execution of projects
20 h
Total168 h
 
Assessment methods:
For awarding the credit is required a drawing of specific technical machine part.
The test includes didactic test on the computer (min. 60% success rate) and an oral part, where the student draws two or three questions. It also examines the understanding of the training programs in the field of engineering.
 
Assessment criteria ratio:
Requirement type
Combined form
Total
0 %
 
Recomended reading and other learning resources:
Basic:
BEDNÁŘ, B. -- ČERMÁK, J. -- KRÁL, M. Engineering Technology . Prague: CTU, 2003. 210 p. ISBN 80-01-02775-9.
FISCHER, U. et al. Základy strojnictví. 1st ed. Praha: Europa-Sobotáles, 2004. 290 p. ISBN 80-86706-09-5.
BRANDEJS, J. -- SVOBODA, P. -- PROKEŠ, F. Základy konstruování. Brno: Akademické nakladatelství CERM, 2008. 325 p. ISBN 978-80-7204-584-6.
SVOBODA, P. et al. Základy konstruování. 2nd ed. Brno: Akademické nakladatelství CERM, 2008. 234 p. ISBN 978-80-7204-584-6.

Recommended:
Černý, M., Korozní vlastnosti kovových konstrukčních materiálů , Brno: Skriptum MZLU, 1994
Filípek, J., Ščerbejová, M., Šoch, Z. Základy strojnictví - multimediální výuková pomůcka
Ščerbejová, M., Strojírenská technologie , Brno: Skriptum MZLU, 1993

Course listed in study plans for this semester:
Field of study B-WT-WM Waste Management, part-time form, initial period WS 2019/2020
 
Course listed in previous semesters:
Teaching place:
Brno


Last modification made by Ing. Michal Karhánek on 04/23/2020.

Type of output: