Course syllabus ZAS - Basis of Machine Industry (FA - SS 2019/2020)


     Czech          English          


Course code:
ZAS
Course title in Czech:
Basis of Machine Industry
Course title in English:
Basis of Machine Industry
Semester:
SS 2019/2020
Mode of completion and number of credits: Exam (6 credits)
Mode of delivery and timetabled classes: full-time, 2/2 (hours of lectures per week / hours of seminars per week)
Level of course: bachelor
Course type:
required
Type of delivery: usual
Mode of delivery for our mobility students abroad: -- item not defined --
Language of instruction:
Czech
Course supervisor: doc. Ing. Jiří Votava, Ph.D.
Course supervising department:
Faculty:
Faculty of AgriSciences
Teachers:
doc. Ing. Jiří Votava, Ph.D. (examiner, instructor, lecturer, supervisor)
Prerequisites:
 
Timetable in this semester:
Day
From-till
Room
Teacher
Entry
Frequency
Capacity
Thursday
9.00-10.50J02J. VotavaLectureEvery week
20
Thursday
11.00-12.50
J02
not set
Seminar
Every week
18
 
Aim of the course and learning outcomes:
Students learn basic terminology of Engineering. After an exam student should be able to professional communicate with technicians, staff sellers and repairmen. Student will be also manage to judge suitability of designed material, corrosion protection and technology of specific machinery components and technical parameters of machines and equipment.
 
Course content:
1.Technical materials (allowance 2/2)
 
a.Ferrous metals
b.
Non-ferrous metals

2.
Technical drawing requirements (allowance 2/2)
 
a.Technical drawing requirements
b.
Ways of screening, drawing and quotation
c.
Dimensional tolerances, variations of shape and position of functional areas, the surface roughness

3.Technical control (allowance 2/2)
 
a.
Measuring of length, shape and surface roughness
b.
Measuring errors

4.
Machine parts production (allowance 2/2)
 
a.
Casting, forming, welding
b.
Overview of tilth technology, cutting conditions and production environmental aspects

5.
Basic principles of turning (allowance 2/2)
 
a.
Machine – Tool
b.Cutting conditions

6.
Deformation at turning work (allowance 2/2)
 
a.Primary and secondary deformation

7.
Cutting materials of surfacing tools (allowance 2/2)
 
a.
High-speed steel, cemented carbide
b.Special of materials

8.
Basic principles of milling (allowance 2/2)
 
a.
Parallel and upcut milling

9.
Milling of module sprockets (allowance 2/2)
 
a.Spur gearing, internal spur gearing

10.
Basic principles of grinding (allowance 2/2)
 
a.
Surface grinding of flat surfaces

11.
Surface roughness after machine (allowance 2/2)
 
a.
Device for surface roughness determination

12.
Machine parts and mechanisms (allowance 2/2)
 
a.
Demountable and non-demountable connections
b.
Pins, axles, shafts, bearings

13.
Corrosion and corrosion protection (allowance 2/2)
 
a.
Corrosion partition, principles of corrosion, factors affecting the process of corrosion
b.
Technology of corrosion protection

14.Corrosion and corrosion protection (allowance 2/2)
 
a.Corrosion tests, test the effectiveness of protective surface protection
b.Corrosion protection environmental aspects

Learning activities and teaching methods:
Type of teaching method
Daily attendance
lecture
28 h
practice28 h
preparation for exam40 h
preparation for regular assessment
30 h
preparation for regular testing
12 h
elaboration of reports10 h
elaboration and execution of projects
20 h
Total168 h
 
Assessment methods:
For awarding the credit is required a drawing of specific technical machine part. I tis required to pass two written tests successfully (1 - Engineering Technology, 2 - machine parts + physical basis techniques) with 60% success rate.
The test includes didactic test on the computer (min. 60% success rate) and an oral part, where the student draws two or three questions. It also examines the understanding of the training programs in the field of engineering.
 
Assessment criteria ratio:
Requirement type
Daily attendance
Total
0 %
 
Recomended reading and other learning resources:
Basic:
FISCHER, U. et al. Základy strojnictví. 1st ed. Praha: Europa-Sobotáles, 2004. 290 p. ISBN 80-86706-09-5.
SVOBODA, P. et al. Základy konstruování. 2nd ed. Brno: Akademické nakladatelství CERM, 2008. 234 p. ISBN 978-80-7204-584-6.
FILÍPEK, J. -- ŠOCH, Z. -- ŠČERBEJOVÁ, M. Základy strojnictví.  [online]. 2008. URL: http://CD.
BEDNÁŘ, B. -- ČERMÁK, J. -- KRÁL, M. Engineering Technology . Prague: CTU, 2003. 210 p. ISBN 80-01-02775-9.
BRANDEJS, J. -- SVOBODA, P. -- PROKEŠ, F. Základy konstruování. Brno: Akademické nakladatelství CERM, 2008. 325 p. ISBN 978-80-7204-584-6.
ŠČERBEJOVÁ, M. Strojírenská technologie. 1st ed. Brno: Vysoká škola zemědělská, 1993. 132 p. ISBN 80-7157-083-4.

Course listed in study plans for this semester:
Field of study B-WT-WM Waste Management, full-time form, initial period WS 2019/2020
 
Course listed in previous semesters:
Teaching place:
Brno


Last modification made by Ing. Michal Karhánek on 04/23/2020.

Type of output: